FEATURES for SDP 12 SSX

• Performance Graph SDP 12 SS N/B/S/H/V

  

  • Performance as measured pumping water at 20 deg C
  • Disclaimer: Actual pump performance may vary depending on number of bends, suction needed and friction in length of discharge piping.
  • For guidance on how to select a suitable pump, visit Teryair AODD pump selection guide.
• Performance Graph SDP 12 SST

  

  • Performance as measured pumping water at 20 deg C
  • Disclaimer: Actual pump performance may vary depending on number of bends, suction needed and friction in length of discharge piping.
  • For guidance on how to select a suitable pump, visit Teryair AODD pump selection guide.
• Dimensions SDP 12 SSX
  
• Pump Nomenclature

   

  XX XX XX X X X Air Valve Type Pump Size Material of Construction Material of Diaphragm Bolted or Clamped Threading on Inlet and Outlet DP - Classic ADP - Advanced SDP - MaxFlo 06 - 1/4” AL - Aluminum SS - Stainless Steel 316L PP - Polypropylene CI - Ductile Iron PD - PVDF B - Nitrile N - Neoprene S - Santoprene T - PTFE V - Viton H - Hytrel B - Bolted C - Clamped R- NPT G - BSPT P - BSPP F - Flanged 12 - 1/2” 15 - 1/2” 30/25 - 1” 40 - 1 - 1/2” 50 - 2 “ 75- 3” 100 - 4”

  Eg: SDP40ALB-CR indicates an AODD pump having MaxFLO valve type, Pump size -40, Aluminium material of construction, Nitrile Diaphragms, clamped construction and NPT threading.

• Diaphragm Choices SDP 12 SSX

  Type of Diaphragm Image Typical Usage Nitrile Excellent for applications involving petroleum / oil-based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentine and motor oils. Temperature range -12 C to +82 C (+10 F to +180 F) Santoprene Good abrasion resistance. Low cost. Can handle mild acids and alkalis well. Excellent low cost alternative to ptfe. Excellent suction capabilites. Excellent general purpose diaphragm. Temperature range -40 C to +107 C (-40 F to +225 F) Hytrel Good abrasion resistance. Low cost. Excellent suction capabilites Good general purpose diaphragm. Temperature range -29 C to +104 C (-20 F to +220 F) PTFE Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Temperature range +4°C to +104 C (+40 F to +220F)

• ATEX Code

  Pump Size	Series	Wetted Materials	Center Section	Dipharagm Materials	ATEX Rating
  12 (1/2")	SDP	Stainless Steel	Stainless Steel	Neoprene	ll 2 GD Ex h IIC T6 Gb Ex h IIIC T85⁰C Db I M2 Ex h I Mb (IP65)
  				Buna-N
  				Viton-FKM	ll 2 GD Ex h IIC T3 Gb Ex h IIIC T200⁰C Db (IP65) I M2 Ex h I Mb (IP65)
  				Sentoprene	ll 2 GD Ex h IIC T5 Gb Ex h IIIC T100⁰C Db (IP65) I M2 Ex h I Mb (IP65)
  				Hytrel
  				PTFE